Tap WaterIndex

← Alabama

Tap water quality report

Walnut Hill Water Authority

EPA monitoring tested this supplier for 35 contaminants and detected 4. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

35
contaminants tested
4
detected
14,127
people served
0
health-based violations
Alabama rankingsLead in AlabamaPFAS in Alabama
Water source
SWP
Ownership
Local government
Counties served
Tallapoosa

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

0
health-based violations
10
violations on file
2
still open
ViolationTypeStatusPeriod
MR Monitoring Unaddressed 2023-01-01
MR Monitoring Unaddressed 2023-01-01
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30
MR Monitoring Resolved 2008-07-01 → 2008-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
81.405 µg/L 102%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 112 µg/L
128/128 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
34.86 µg/L 58%
of the EPA limit 60 µg/L
worst single sample: 70 µg/L
128/128 SYR4 2012–2019
Copper
42.85 µg/L 3.3%
of the EPA limit 1300 µg/L
worst single sample: 73 µg/L
30/30 SYR4 2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
 18/18 LCR 2025
31 contaminants tested, none detected
11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaHfpo-DaLeadNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaLithium

Utility contact

Contact
EAST, ROBIN
Phone
256-825-9841
Email
[email protected]

Frequently asked questions about Walnut Hill Water Authority

Is Walnut Hill Water Authority tap water safe to drink?

EPA monitoring detected 4 contaminants in Walnut Hill Water Authority's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Walnut Hill Water Authority's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Lead. The full list with the level and data source for each is above.

How many people does Walnut Hill Water Authority serve?

Walnut Hill Water Authority reports serving 14,127 people in Alabama, per its EPA record.

Has Walnut Hill Water Authority had any water quality violations?

The EPA has 10 violations on file for Walnut Hill Water Authority, of which 0 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.