Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Archived | 2020-01-01 → 2022-12-31 |
PFAS detected
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| TTHM | 52 µg/L 65% of the EPA limit 80 µg/L
worst single sample: 90 µg/L | 849/863 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 40.35 µg/L 67% of the EPA limit 60 µg/L
worst single sample: 73.3 µg/L | 786/863 | SYR4 | 2012–2019 |
| Copper | 181 µg/L 14% of the EPA limit 1300 µg/L
worst single sample: 380 µg/L | 99/126 | SYR4 | 2012–2019 |
| Nitrate | 2960 µg/L 30% of the EPA limit 10000 µg/L
worst single sample: 3150 µg/L | 88/88 | SYR4 | 2012–2019 |
| Chloroform | 22.05 µg/L No EPA limit set
worst single sample: 30.4 µg/L | 60/68 | SYR4 | 2012–2019 |
| Tetrachloroethylene | 4.4425 µg/L 89% of the EPA limit 5 µg/L
worst single sample: 9.4 µg/L | 58/130 | SYR4 | 2012–2019 |
| Bromodichloromethane | 7.356 µg/L No EPA limit set
worst single sample: 7.73 µg/L | 37/68 | SYR4 | 2012–2019 |
| Lead | 0.0010 mg/L 6.7% of the EPA limit 0.0150 mg/L | 35/35 | LCR | 2023 |
| Trichloroethylene | 3.382 µg/L 68% of the EPA limit 5 µg/L
worst single sample: 3.56 µg/L | 34/130 | SYR4 | 2012–2019 |
| Dibromochloromethane | 2.248 µg/L No EPA limit set
worst single sample: 4.4 µg/L | 29/68 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 2552.5 µg/L 26% of the EPA limit 10000 µg/L
worst single sample: 2960 µg/L | 26/26 | SYR4 | 2012–2019 |
| Fluoride | 816 µg/L 20% of the EPA limit 4000 µg/L
worst single sample: 930 µg/L | 20/26 | SYR4 | 2012–2019 |
| Lead | 30.5 µg/L 203% of the EPA limit, at the 95th percentile of samples — 15 µg/L
worst single sample: 37 µg/L | 6/126 | SYR4 | 2012–2019 |
| Gross Alpha, Excl. Radon And U | 3.635 pCi/L 24% of the EPA limit 15 pCi/L
worst single sample: 4.1 pCi/L | 4/4 | SYR4 | 2017–2018 |
| Barium | 26 µg/L 1.3% of the EPA limit 2000 µg/L | 1/26 | SYR4 | 2012–2019 |
| Carbon Tetrachloride | 0.5400 µg/L 11% of the EPA limit 5 µg/L | 1/130 | SYR4 | 2012–2019 |
| Toluene | 0.7700 µg/L 0.1% of the EPA limit 1000 µg/L | 1/130 | SYR4 | 2012–2019 |
81 contaminants tested, none detected
Utility contact
Frequently asked questions about Huntsville Utilities Water Dept.
Is Huntsville Utilities Water Dept. tap water safe to drink?
EPA monitoring detected 23 contaminants in Huntsville Utilities Water Dept.'s water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Huntsville Utilities Water Dept.'s water?
EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Copper, Nitrate, Chloroform, and others. The full list with the level and data source for each is above.
How many people does Huntsville Utilities Water Dept. serve?
Huntsville Utilities Water Dept. reports serving 310,107 people in Alabama, per its EPA record.
Has Huntsville Utilities Water Dept. had any water quality violations?
The EPA has 1 violation on file for Huntsville Utilities Water Dept., of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.