Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2020-04-01 → 2020-06-30 |
| MCL | Health-based | Resolved | 2007-02-01 → 2007-02-28 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MCL | Health-based | Archived | 1996-10-01 → 1996-10-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
| MR | Monitoring | Resolved | 2024-01-01 → 2024-03-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Chloroform | 4.825 µg/L No EPA limit set
worst single sample: 7.63 µg/L | 40/77 | SYR4 | 2012–2019 |
| Nitrate | 200.5 µg/L 2% of the EPA limit 10000 µg/L
worst single sample: 210 µg/L | 40/66 | SYR4 | 2012–2019 |
| Bromodichloromethane | 1.796 µg/L No EPA limit set
worst single sample: 2.51 µg/L | 33/77 | SYR4 | 2012–2019 |
| Copper | 283.5 µg/L 22% of the EPA limit 1300 µg/L
worst single sample: 338 µg/L | 26/33 | SYR4 | 2013–2019 |
| Lead | 0.0020 mg/L 13% of the EPA limit 0.0150 mg/L | 19/19 | LCR | 2022 |
| TTHM | 8.12 µg/L 10% of the EPA limit 80 µg/L
worst single sample: 9.5 µg/L | 16/16 | SYR4 | 2012–2019 |
| Fluoride | 3934 µg/L 98% of the EPA limit 4000 µg/L
worst single sample: 5880 µg/L | 15/17 | SYR4 | 2013–2019 |
| Dibromochloromethane | 0.9435 µg/L No EPA limit set
worst single sample: 1.08 µg/L | 14/77 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 20.5 µg/L 34% of the EPA limit 60 µg/L
worst single sample: 24.1 µg/L | 10/16 | SYR4 | 2012–2019 |
| Lead | 15 µg/L 100% of the EPA limit 15 µg/L
worst single sample: 21 µg/L | 9/34 | SYR4 | 2013–2019 |
| Xylenes, Total | 7.888 µg/L 0.1% of the EPA limit 10000 µg/L
worst single sample: 11.9 µg/L | 9/77 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 200 µg/L 2% of the EPA limit 10000 µg/L | 8/13 | SYR4 | 2013–2019 |
| Lithium | 20.5 µg/L No EPA limit set | 8/12 | UCMR-5 | 2024 |
| Gross Alpha, Excl. Radon And U | 1.455 pCi/L 9.7% of the EPA limit 15 pCi/L
worst single sample: 1.5 pCi/L | 4/4 | SYR4 | 2019 |
| Ethylbenzene | 2.375 µg/L 0.3% of the EPA limit 700 µg/L
worst single sample: 2.47 µg/L | 2/77 | SYR4 | 2012–2019 |
| Barium | 24 µg/L 1.2% of the EPA limit 2000 µg/L | 1/13 | SYR4 | 2013–2019 |
88 contaminants tested, none detected
Utility contact
Frequently asked questions about Brewton Water Works
Is Brewton Water Works tap water safe to drink?
EPA monitoring detected 16 contaminants in Brewton Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Brewton Water Works's water?
EPA monitoring detected Chloroform, Nitrate, Bromodichloromethane, Copper, Lead, and others. The full list with the level and data source for each is above.
How many people does Brewton Water Works serve?
Brewton Water Works reports serving 11,430 people in Alabama, per its EPA record.
Has Brewton Water Works had any water quality violations?
The EPA has 351 violations on file for Brewton Water Works, of which 7 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.