← Alabama

Tap water quality report

Friendship Water Works

EPA monitoring tested this supplier for 33 contaminants and detected 4. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

33
contaminants tested
4
detected
4,425
people served
2
health-based violations
Water source
SWP
Ownership
Private
Counties served
Elmore

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

2
health-based violations
107
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Archived 2000-10-01 → 2000-10-31
MCL Health-based Archived 2000-10-01 → 2000-10-31
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11
MR Monitoring Resolved 2018-01-09 → 2018-04-11

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
PFOS 0.0045 µg/L 1/8 2024

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
88.675 µg/L 111%
of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 110.7 µg/L
58/58 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
65.325 µg/L 109%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 79.9 µg/L
58/58 SYR4 2012–2019
Lead
0.00070 mg/L 4.7%
of the EPA limit 0.0150 mg/L
18/18 LCR 2023
29 contaminants tested, none detected
11Cl-PF3OUdS4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaHfpo-DaNetfosaaNfdhaNmefosaaPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPfpeaPfpesPftaPftrdaPfunaLithium

Utility contact

Contact
DENNIS, STEVEN
Phone
334-283-6463
Email
[email protected]

Frequently asked questions about Friendship Water Works

Is Friendship Water Works tap water safe to drink?

EPA monitoring detected 4 contaminants in Friendship Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Friendship Water Works's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Lead, PFOS. The full list with the level and data source for each is above.

How many people does Friendship Water Works serve?

Friendship Water Works reports serving 4,425 people in Alabama, per its EPA record.

Has Friendship Water Works had any water quality violations?

The EPA has 107 violations on file for Friendship Water Works, of which 2 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.