← Alabama

Tap water quality report

Clanton, the Ww & Sb of the City of

EPA monitoring tested this supplier for 105 contaminants and detected 18. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

105
contaminants tested
18
detected
13,500
people served
14
health-based violations
Water source
Surface water
Ownership
Local government
Counties served
Chilton

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

14
health-based violations
79
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 1994-04-01 → 1994-06-30
MCL Health-based Resolved 1994-04-01 → 1994-06-30
MCL Health-based Resolved 1994-01-01 → 1994-03-31
MCL Health-based Resolved 1994-01-01 → 1994-03-31
MCL Health-based Resolved 1993-10-01 → 1993-12-31
MCL Health-based Resolved 1993-10-01 → 1993-12-31
MCL Health-based Resolved 1993-10-01 → 1993-12-31
MCL Health-based Resolved 1993-07-01 → 1993-09-30
MCL Health-based Resolved 1993-07-01 → 1993-09-30
MCL Health-based Resolved 1993-07-01 → 1993-09-30

PFAS detected

PFAS are industrial “forever chemicals”. These are the EPA's latest nationwide test results (2023–2025).
ContaminantMaxDetection ratePeriod
Pfba 0.0130 µg/L 4/4 2025
PFBS 0.0850 µg/L 4/4 2025
Pfhpa 0.0068 µg/L 4/4 2025
Pfhxa 0.0190 µg/L 4/4 2025
PFOA 0.0260 µg/L 4/4 2025
PFOS 0.0280 µg/L 4/4 2025
Pfpea 0.0310 µg/L 4/4 2025
PFHXS 0.0033 µg/L 1/4 2025

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Chlorite
670 µg/L 67%
of the EPA limit 1000 µg/L
worst single sample: 730 µg/L
161/164 SYR4 2012–2019
TTHM
65.075 µg/L 81%
of the EPA limit 80 µg/L
worst single sample: 93.4 µg/L
160/160 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
35.51 µg/L 59%
of the EPA limit 60 µg/L
worst single sample: 39.9 µg/L
160/160 SYR4 2012–2019
Copper
44 µg/L 3.4%
of the EPA limit 1300 µg/L
worst single sample: 59 µg/L
25/39 SYR4 2012–2019
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
23/23 LCR 2024
Nitrate
500 µg/L 5%
of the EPA limit 10000 µg/L
14/16 SYR4 2012–2019
Nitrate-Nitrite
500 µg/L 5%
of the EPA limit 10000 µg/L
7/8 SYR4 2012–2019
Bromodichloromethane
7.827 µg/L
No EPA limit set
worst single sample: 7.95 µg/L
4/4 SYR4 2012–2017
Chloroform
26.225 µg/L
No EPA limit set
worst single sample: 27.8 µg/L
4/4 SYR4 2012–2017
Dibromochloromethane
3.0775 µg/L
No EPA limit set
worst single sample: 3.1 µg/L
4/4 SYR4 2012–2017
87 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalBromoformChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneFluorideGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoLeadMercuryMethoxychlorNetfosaaNfdhaNmefosaaNitriteOxamylPfdaPfdoaPfeesaPfhpsPfmbaPfmpaPFNAPfpesPftaPftrdaPfunaPentachlorophenolPicloramSeleniumSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
HIGGINS, STANLEY
Phone
205-755-6840
Email
[email protected]

Frequently asked questions about Clanton, the Ww & Sb of the City of

Is Clanton, the Ww & Sb of the City of tap water safe to drink?

EPA monitoring detected 18 contaminants in Clanton, the Ww & Sb of the City of's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Clanton, the Ww & Sb of the City of's water?

EPA monitoring detected Chlorite, TTHM, Total Haloacetic Acids (HAA5), Copper, Lead, and others. The full list with the level and data source for each is above.

How many people does Clanton, the Ww & Sb of the City of serve?

Clanton, the Ww & Sb of the City of reports serving 13,500 people in Alabama, per its EPA record.

Has Clanton, the Ww & Sb of the City of had any water quality violations?

The EPA has 79 violations on file for Clanton, the Ww & Sb of the City of, of which 14 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.