Tap WaterIndex

← Alabama

Tap water quality report

Eufaula Water Works

EPA monitoring tested this supplier for 104 contaminants and detected 17. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

104
contaminants tested
17
detected
17,970
people served
25
health-based violations
Alabama rankingsLead in AlabamaPFAS in Alabama
Water source
Ground water
Ownership
Local government
Counties served
Barbour

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

25
health-based violations
196
violations on file
0
still open
ViolationTypeStatusPeriod
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-08-01 → 2013-08-31
MCL Health-based Resolved 2013-04-01 → 2013-04-30
MCL Health-based Resolved 2013-04-01 → 2013-04-30
MCL Health-based Resolved 2013-04-01 → 2013-04-30
MCL Health-based Resolved 2013-04-01 → 2013-04-30
MCL Health-based Archived 1999-02-01 → 1999-02-28
MCL Health-based Archived 1999-02-01 → 1999-02-28

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
TTHM
20.31 µg/L 25%
of the EPA limit 80 µg/L
worst single sample: 22.6 µg/L
50/50 SYR4 2012–2019
Total Haloacetic Acids (HAA5)
3.7815 µg/L 6.3%
of the EPA limit 60 µg/L
worst single sample: 5.87 µg/L
34/50 SYR4 2012–2019
Nitrate
267 µg/L 2.7%
of the EPA limit 10000 µg/L
worst single sample: 301 µg/L
26/112 SYR4 2012–2019
Lead
0.00052 mg/L 3.5%
of the EPA limit 0.0150 mg/L
 22/22 LCR 2023
Fluoride
1493 µg/L 37%
of the EPA limit 4000 µg/L
worst single sample: 1550 µg/L
20/20 SYR4 2013–2019
Bromodichloromethane
1.778 µg/L
No EPA limit set
worst single sample: 2.35 µg/L
9/26 SYR4 2013–2019
Dibromochloromethane
2.496 µg/L
No EPA limit set
worst single sample: 3.04 µg/L
9/26 SYR4 2013–2019
Nitrate-Nitrite
250.2 µg/L 2.5%
of the EPA limit 10000 µg/L
worst single sample: 307 µg/L
9/20 SYR4 2013–2019
Antimony, Total
0.8240 µg/L 14%
of the EPA limit 6 µg/L
worst single sample: 0.8300 µg/L
7/20 SYR4 2013–2019
Nitrite
6.7 µg/L 0.7%
of the EPA limit 1000 µg/L
worst single sample: 7 µg/L
7/20 SYR4 2013–2019
Chloroform
1.08 µg/L
No EPA limit set
worst single sample: 1.21 µg/L
5/26 SYR4 2013–2019
Lead
0.9400 µg/L 6.3%
of the EPA limit 15 µg/L
worst single sample: 1 µg/L
5/20 SYR4 2013–2019
Arsenic
1.0805 µg/L 11%
of the EPA limit 10 µg/L
worst single sample: 1.1 µg/L
4/20 SYR4 2013–2019
Selenium
0.4765 µg/L 1%
of the EPA limit 50 µg/L
worst single sample: 0.4900 µg/L
4/20 SYR4 2013–2019
Bromoform
1.903 µg/L
No EPA limit set
worst single sample: 1.93 µg/L
2/26 SYR4 2013–2019
Thallium, Total
0.2700 µg/L 14%
of the EPA limit 2 µg/L
 2/20 SYR4 2013–2019
Barium
3.9 µg/L 0.2%
of the EPA limit 2000 µg/L
 1/20 SYR4 2013–2019
87 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane11Cl-PF3OUdS2,4,5-TP2,4-D4:2 Fts6:2 Fts8:2 Fts9Cl-PF3ONSAdonaAtrazineBhc-GammaBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCopperCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Alpha, Excl. Radon And UHexachlorobenzeneHfpo-DaHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNetfosaaNfdhaNmefosaaOxamylPfbaPFBSPfdaPfdoaPfeesaPfhpaPfhpsPfhxaPFHXSPfmbaPfmpaPFNAPFOAPFOSPfpeaPfpesPftaPftrdaPfunaPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneLithiumO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
HARTSILL, KEVIN
Phone
334-687-1225
Email
[email protected]

Frequently asked questions about Eufaula Water Works

Is Eufaula Water Works tap water safe to drink?

EPA monitoring detected 17 contaminants in Eufaula Water Works's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Eufaula Water Works's water?

EPA monitoring detected TTHM, Total Haloacetic Acids (HAA5), Nitrate, Lead, Fluoride, and others. The full list with the level and data source for each is above.

How many people does Eufaula Water Works serve?

Eufaula Water Works reports serving 17,970 people in Alabama, per its EPA record.

Has Eufaula Water Works had any water quality violations?

The EPA has 196 violations on file for Eufaula Water Works, of which 25 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.