Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2026-01-01 → 2026-03-31 |
| MCL | Health-based | Archived | 2025-10-01 → 2025-12-31 |
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2025-07-01 → 2025-09-30 |
| MCL | Health-based | Archived | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Archived | 2025-04-01 → 2025-06-30 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2025-01-01 → 2025-03-31 |
| MCL | Health-based | Archived | 2024-10-01 → 2024-12-31 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 984.25 µg/L 76% of the EPA limit 1300 µg/L
worst single sample: 1400 µg/L | 70/70 | SYR4 | 2012–2019 |
| Lead | 4.69 µg/L 31% of the EPA limit 15 µg/L
worst single sample: 8.3 µg/L | 52/70 | SYR4 | 2012–2019 |
| Bromodichloromethane | 14.56 µg/L No EPA limit set
worst single sample: 16 µg/L | 32/32 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 47.45 µg/L No EPA limit set
worst single sample: 51 µg/L | 32/32 | SYR4 | 2012–2019 |
| TTHM | 117.25 µg/L 147% of the EPA limit, at the 95th percentile of samples — 80 µg/L
worst single sample: 147.3 µg/L | 32/32 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 106.44 µg/L 177% of the EPA limit, at the 95th percentile of samples — 60 µg/L
worst single sample: 120 µg/L | 32/32 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 53.7 µg/L No EPA limit set
worst single sample: 67 µg/L | 32/32 | SYR4 | 2012–2019 |
| Chloroform | 98.55 µg/L No EPA limit set
worst single sample: 105 µg/L | 31/32 | SYR4 | 2012–2019 |
| Lead | 0.0075 mg/L 50% of the EPA limit 0.0150 mg/L | 22/22 | LCR | 2025 |
| Monochloroacetic Acid | 6.87 µg/L No EPA limit set
worst single sample: 7.5 µg/L | 15/32 | SYR4 | 2012–2019 |
| Dibromochloromethane | 1.268 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 5/32 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 344.6 µg/L 3.4% of the EPA limit 10000 µg/L
worst single sample: 372 µg/L | 5/8 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.8930 µg/L 0% of the EPA limit 10000 µg/L
worst single sample: 0.9000 µg/L | 3/12 | SYR4 | 2012–2019 |
| Arsenic | 0.5638 µg/L 5.6% of the EPA limit 10 µg/L
worst single sample: 0.5660 µg/L | 2/2 | SYR4 | 2012–2013 |
| Antimony, Total | 0.1610 µg/L 2.7% of the EPA limit 6 µg/L | 1/1 | SYR4 | 2014 |
| Barium | 63.4 µg/L 3.2% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2014 |
| Combined Radium (-226 And -228) | 1.4 pCi/L 28% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2013–2018 |
| Fluoride | 307 µg/L 7.7% of the EPA limit 4000 µg/L | 1/1 | SYR4 | 2014 |
| Monobromoacetic Acid | 1.2 µg/L No EPA limit set | 1/32 | SYR4 | 2012–2019 |
| Toluene | 1.5 µg/L 0.2% of the EPA limit 1000 µg/L | 1/12 | SYR4 | 2012–2019 |
30 contaminants tested, none detected
Utility contact
Frequently asked questions about Kotzebue Mun. Water
Is Kotzebue Mun. Water tap water safe to drink?
EPA monitoring detected 20 contaminants in Kotzebue Mun. Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Kotzebue Mun. Water's water?
EPA monitoring detected Copper, Lead, Bromodichloromethane, Dichloroacetic Acid, TTHM, and others. The full list with the level and data source for each is above.
How many people does Kotzebue Mun. Water serve?
Kotzebue Mun. Water reports serving 3,234 people in Alaska, per its EPA record.
Has Kotzebue Mun. Water had any water quality violations?
The EPA has 459 violations on file for Kotzebue Mun. Water, of which 247 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.