Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| TT | Health-based | Resolved | 2019-11-27 |
| Other | Monitoring | Unaddressed | 2025-10-01 |
| Other | Monitoring | Resolved | 2022-07-01 |
| Other | Monitoring | Resolved | 2021-10-01 |
| MR | Monitoring | Resolved | 2021-01-01 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-12-31 |
| Other | Monitoring | Resolved | 2017-07-01 |
| MR | Monitoring | Resolved | 2016-09-01 → 2017-08-31 |
| MR | Monitoring | Resolved | 2016-09-01 → 2017-08-31 |
| Other | Monitoring | Resolved | 2016-04-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Lead | 0.0062 mg/L 41% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2026 |
| Copper | 951.5 µg/L 73% of the EPA limit 1300 µg/L
worst single sample: 1100 µg/L | 10/10 | SYR4 | 2014–2017 |
| Lead | 8.31 µg/L 55% of the EPA limit 15 µg/L
worst single sample: 9.5 µg/L | 8/10 | SYR4 | 2014–2017 |
| Bromodichloromethane | 2.7775 µg/L No EPA limit set
worst single sample: 2.87 µg/L | 6/6 | SYR4 | 2012–2019 |
| Bromoform | 3.6 µg/L No EPA limit set
worst single sample: 3.8 µg/L | 6/6 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.95 µg/L No EPA limit set
worst single sample: 2 µg/L | 6/6 | SYR4 | 2012–2019 |
| Dibromochloromethane | 5.0975 µg/L No EPA limit set
worst single sample: 5.22 µg/L | 6/6 | SYR4 | 2012–2019 |
| TTHM | 11.125 µg/L 14% of the EPA limit 80 µg/L
worst single sample: 11.4 µg/L | 6/6 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 5.225 µg/L 8.7% of the EPA limit 60 µg/L
worst single sample: 6.3 µg/L | 6/6 | SYR4 | 2012–2019 |
| Chloroform | 0.7780 µg/L No EPA limit set
worst single sample: 0.7800 µg/L | 2/6 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 140 µg/L 1.4% of the EPA limit 10000 µg/L | 2/14 | SYR4 | 2012–2018 |
| Barium | 32 µg/L 1.6% of the EPA limit 2000 µg/L | 1/1 | SYR4 | 2018 |
| Combined Radium (-226 And -228) | 0.2370 pCi/L 4.7% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2012–2018 |
| Dichloroacetic Acid | 2.4 µg/L No EPA limit set | 1/6 | SYR4 | 2012–2019 |
| Toluene | 2.2 µg/L 0.2% of the EPA limit 1000 µg/L | 1/2 | SYR4 | 2014–2017 |
| Trichloroacetic Acid | 2.6 µg/L No EPA limit set | 1/6 | SYR4 | 2012–2019 |
| Xylenes, Total | 2.3 µg/L 0% of the EPA limit 10000 µg/L | 1/2 | SYR4 | 2014–2017 |
31 contaminants tested, none detected
Utility contact
Frequently asked questions about Anchor Point Safe Water Corporation
Is Anchor Point Safe Water Corporation tap water safe to drink?
EPA monitoring detected 17 contaminants in Anchor Point Safe Water Corporation's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Anchor Point Safe Water Corporation's water?
EPA monitoring detected Lead, Copper, Lead, Bromodichloromethane, Bromoform, and others. The full list with the level and data source for each is above.
How many people does Anchor Point Safe Water Corporation serve?
Anchor Point Safe Water Corporation reports serving 1,000 people in Alaska, per its EPA record.
Has Anchor Point Safe Water Corporation had any water quality violations?
The EPA has 221 violations on file for Anchor Point Safe Water Corporation, of which 1 is health-based (a contaminant limit or required treatment was breached) and 1 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.