Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MR | Monitoring | Resolved | 2019-07-01 → 2019-09-30 |
| MR | Monitoring | Resolved | 2019-01-01 → 2019-03-31 |
| MR | Monitoring | Resolved | 2017-04-01 → 2017-06-30 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Bromodichloromethane | 5.352 µg/L No EPA limit set
worst single sample: 5.58 µg/L | 13/14 | SYR4 | 2012–2019 |
| Chloroform | 5.836 µg/L No EPA limit set
worst single sample: 6.4 µg/L | 13/14 | SYR4 | 2012–2019 |
| Dibromochloromethane | 4.04 µg/L No EPA limit set
worst single sample: 5 µg/L | 13/14 | SYR4 | 2012–2019 |
| Nitrate-Nitrite | 8065 µg/L 81% of the EPA limit 10000 µg/L
worst single sample: 8580 µg/L | 11/11 | SYR4 | 2012–2019 |
| TTHM | 16.25 µg/L 20% of the EPA limit 80 µg/L
worst single sample: 16.3 µg/L | 11/14 | SYR4 | 2012–2019 |
| Copper | 300 µg/L 23% of the EPA limit 1300 µg/L | 10/10 | SYR4 | 2017 |
| Lead | 0.0066 mg/L 44% of the EPA limit 0.0150 mg/L | 9/9 | LCR | 2023 |
| Lead | 6.1 µg/L 41% of the EPA limit 15 µg/L
worst single sample: 6.7 µg/L | 9/10 | SYR4 | 2017 |
| Bromoform | 1.79 µg/L No EPA limit set
worst single sample: 2 µg/L | 7/14 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 2.896 µg/L 4.8% of the EPA limit 60 µg/L
worst single sample: 3.07 µg/L | 5/14 | SYR4 | 2012–2019 |
| Dichloroacetic Acid | 1.272 µg/L No EPA limit set
worst single sample: 1.3 µg/L | 3/14 | SYR4 | 2012–2019 |
| Dibromoacetic Acid | 1.675 µg/L No EPA limit set
worst single sample: 1.7 µg/L | 2/14 | SYR4 | 2012–2019 |
| Nitrate | 3160 µg/L 32% of the EPA limit 10000 µg/L | 2/2 | SYR4 | 2017 |
| Arsenic | 0.8240 µg/L 8.2% of the EPA limit 10 µg/L | 1/3 | SYR4 | 2014–2018 |
| Monochloroacetic Acid | 3.07 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
| Trichloroacetic Acid | 1.05 µg/L No EPA limit set | 1/14 | SYR4 | 2012–2019 |
| Xylenes, Total | 0.6000 µg/L 0% of the EPA limit 10000 µg/L | 1/7 | SYR4 | 2012–2019 |
64 contaminants tested, none detected
Utility contact
Frequently asked questions about Valley Utilities Llc
Is Valley Utilities Llc tap water safe to drink?
EPA monitoring detected 17 contaminants in Valley Utilities Llc's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Valley Utilities Llc's water?
EPA monitoring detected Bromodichloromethane, Chloroform, Dibromochloromethane, Nitrate-Nitrite, TTHM, and others. The full list with the level and data source for each is above.
How many people does Valley Utilities Llc serve?
Valley Utilities Llc reports serving 1,590 people in Alaska, per its EPA record.
Has Valley Utilities Llc had any water quality violations?
The EPA has 3 violations on file for Valley Utilities Llc, of which 0 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.