Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Archived | 2020-08-01 → 2020-08-31 |
| MCL | Health-based | Archived | 2020-08-01 → 2020-08-31 |
| MCL | Health-based | Archived | 2020-08-01 → 2020-08-31 |
| TT | Health-based | Resolved | 2016-02-01 |
| TT | Health-based | Resolved | 2016-02-01 |
| TT | Health-based | Resolved | 2016-02-01 |
| MCL | Health-based | Resolved | 2014-08-01 → 2014-08-31 |
| MCL | Health-based | Resolved | 2014-07-01 → 2014-07-31 |
| TT | Health-based | Resolved | 2014-06-02 |
| TT | Health-based | Resolved | 2014-06-02 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 195.1 µg/L 15% of the EPA limit 1300 µg/L
worst single sample: 197 µg/L | 20/20 | SYR4 | 2014–2019 |
| Nitrate-Nitrite | 1260 µg/L 13% of the EPA limit 10000 µg/L | 20/20 | SYR4 | 2012–2019 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L | 13/13 | LCR | 2024 |
| Lead | 11.8 µg/L 79% of the EPA limit 15 µg/L
worst single sample: 14 µg/L | 5/20 | SYR4 | 2014–2019 |
| Barium | 96 µg/L 4.8% of the EPA limit 2000 µg/L
worst single sample: 100 µg/L | 3/3 | SYR4 | 2016–2019 |
| Selenium | 3.9 µg/L 7.8% of the EPA limit 50 µg/L
worst single sample: 4 µg/L | 3/3 | SYR4 | 2016–2019 |
| Combined Uranium | 4.2 µg/L 14% of the EPA limit 30 µg/L | 2/4 | SYR4 | 2013–2019 |
| Fluoride | 295 µg/L 7.4% of the EPA limit 4000 µg/L
worst single sample: 300 µg/L | 2/2 | SYR4 | 2018–2019 |
| Bromodichloromethane | 3.2 µg/L No EPA limit set | 1/5 | SYR4 | 2015–2019 |
| Bromoform | 0.5700 µg/L No EPA limit set | 1/5 | SYR4 | 2015–2019 |
| Chloroform | 2.5 µg/L No EPA limit set | 1/5 | SYR4 | 2015–2019 |
| Chromium | 10 µg/L 10% of the EPA limit 100 µg/L | 1/3 | SYR4 | 2016–2019 |
| Combined Radium (-226 And -228) | 0.6000 pCi/L 12% of the EPA limit 5 pCi/L | 1/2 | SYR4 | 2019 |
| Dibromoacetic Acid | 1.1 µg/L No EPA limit set | 1/1 | SYR4 | 2015 |
| Dibromochloromethane | 2.8 µg/L No EPA limit set | 1/5 | SYR4 | 2015–2019 |
| Dichloroacetic Acid | 1.2 µg/L No EPA limit set | 1/1 | SYR4 | 2015 |
| TTHM | 9.1 µg/L 11% of the EPA limit 80 µg/L | 1/5 | SYR4 | 2015–2019 |
| Total Haloacetic Acids (HAA5) | 2.7 µg/L 4.5% of the EPA limit 60 µg/L | 1/1 | SYR4 | 2015 |
62 contaminants tested, none detected
Utility contact
Frequently asked questions about Mnihnapa Water
Is Mnihnapa Water tap water safe to drink?
EPA monitoring detected 18 contaminants in Mnihnapa Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Mnihnapa Water's water?
EPA monitoring detected Copper, Nitrate-Nitrite, Lead, Lead, Barium, and others. The full list with the level and data source for each is above.
How many people does Mnihnapa Water serve?
Mnihnapa Water reports serving 220 people in Montana, per its EPA record.
Has Mnihnapa Water had any water quality violations?
The EPA has 198 violations on file for Mnihnapa Water, of which 29 are health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.