← Montana

Tap water quality report

Pryor Water

EPA monitoring tested this supplier for 81 contaminants and detected 20. A detection doesn't automatically mean the water is unsafe — the level and EPA source for each is below.

81
contaminants tested
20
detected
406
people served
18
health-based violations
Water source
Ground water
Ownership
Native American

Compliance record

Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.

18
health-based violations
236
violations on file
2
still open
ViolationTypeStatusPeriod
TT Health-based Unaddressed 2025-10-10
TT Health-based Resolved 2020-11-28
TT Health-based Addressed 2018-11-02
MCL Health-based Resolved 2007-06-01 → 2007-06-30
MCL Health-based Resolved 2007-06-01 → 2007-06-30
MCL Health-based Resolved 2007-06-01 → 2007-06-30
MCL Health-based Resolved 2007-06-01 → 2007-06-30
MCL Health-based Resolved 2004-09-01 → 2004-09-30
MCL Health-based Resolved 2004-09-01 → 2004-09-30
MCL Health-based Resolved 2004-09-01 → 2004-09-30

Other contaminants detected

Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of this system's samples — over 100% is worth reading, but is not by itself a violation. Where a single sample came in higher than that percentile, it is noted under the bar. Formal violations are listed separately.
ContaminantLevel vs EPA limitDetection rateSourcePeriod
Nitrate-Nitrite
2873.5 µg/L 29%
of the EPA limit 10000 µg/L
worst single sample: 2920 µg/L
24/24 SYR4 2012–2019
Copper
275 µg/L 21%
of the EPA limit 1300 µg/L
worst single sample: 374 µg/L
10/12 SYR4 2014–2017
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
9/9 LCR 2025
TTHM
36.6 µg/L 46%
of the EPA limit 80 µg/L
worst single sample: 42 µg/L
5/9 SYR4 2014–2019
Total Haloacetic Acids (HAA5)
39.4 µg/L 66%
of the EPA limit 60 µg/L
worst single sample: 45 µg/L
5/5 SYR4 2014–2017
Lead
2.85 µg/L 19%
of the EPA limit 15 µg/L
worst single sample: 3 µg/L
4/12 SYR4 2014–2017
Bromodichloromethane
6.63 µg/L
No EPA limit set
worst single sample: 7 µg/L
3/8 SYR4 2014–2019
Combined Uranium
2.02 µg/L 6.7%
of the EPA limit 30 µg/L
worst single sample: 2.1 µg/L
3/3 SYR4 2016–2019
Dibromoacetic Acid
0.8500 µg/L
No EPA limit set
worst single sample: 0.9000 µg/L
3/4 SYR4 2014–2017
Chloroform
32.85 µg/L
No EPA limit set
worst single sample: 34 µg/L
2/8 SYR4 2014–2019
Combined Radium (-226 And -228)
2.07 pCi/L 41%
of the EPA limit 5 pCi/L
worst single sample: 2.1 pCi/L
2/3 SYR4 2016–2019
Dibromochloromethane
1.295 µg/L
No EPA limit set
worst single sample: 1.3 µg/L
2/8 SYR4 2014–2019
Dichloroacetic Acid
17.54 µg/L
No EPA limit set
worst single sample: 18 µg/L
2/4 SYR4 2014–2017
Fluoride
300 µg/L 7.5%
of the EPA limit 4000 µg/L
2/2 SYR4 2019
Trichloroacetic Acid
24.14 µg/L
No EPA limit set
worst single sample: 25 µg/L
2/4 SYR4 2014–2017
Bromoform
1 µg/L
No EPA limit set
1/8 SYR4 2014–2019
Gross Alpha, Excl. Radon And U
3.6 pCi/L 24%
of the EPA limit 15 pCi/L
1/3 SYR4 2016–2019
Monobromoacetic Acid
0.5400 µg/L
No EPA limit set
1/4 SYR4 2014–2017
Monochloroacetic Acid
1.3 µg/L
No EPA limit set
1/4 SYR4 2014–2017
Selenium
1 µg/L 2%
of the EPA limit 50 µg/L
1/2 SYR4 2019
61 contaminants tested, none detected
1,1,1-Trichloroethane1,1,2-Trichloroethane1,1-Dichloroethylene1,2,4-Trichlorobenzene1,2-DIBROMO-3-CHLOROPROPANE1,2-Dichloroethane1,2-Dichloropropane2,4,5-TP2,4-DAntimony, TotalArsenicAtrazineBhc-GammaBariumBenzeneBenzo(A)PyreneBeryllium, TotalChlorobenzeneCyanideCadmiumCarbofuranCarbon TetrachlorideChlordaneChromiumDichloromethaneDalaponDi(2-ethylhexyl) AdipateDi(2-ethylhexyl) PhthalateDinosebDiquatEthylene DibromideEndothallEndrinEthylbenzeneGlyphosateGross Beta Particle ActivityHexachlorobenzeneHeptachlorHeptachlor EpoxideHexachlorocyclopentadieneLassoMercuryMethoxychlorNitriteOxamylPentachlorophenolPicloramSimazineStyreneTetrachloroethyleneThallium, TotalTolueneTotal Polychlorinated Biphenyls (PCB)ToxapheneTrichloroethyleneVinyl ChlorideXylenes, Totalcis-1,2-DichloroethyleneO-DichlorobenzeneP-Dichlorobenzenetrans-1,2-Dichloroethylene

Utility contact

Contact
STOPS, JR., MARVIN (WES)
Phone
406-697-4765
Email
[email protected]

Frequently asked questions about Pryor Water

Is Pryor Water tap water safe to drink?

EPA monitoring detected 20 contaminants in Pryor Water's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.

What contaminants were detected in Pryor Water's water?

EPA monitoring detected Nitrate-Nitrite, Copper, Lead, TTHM, Total Haloacetic Acids (HAA5), and others. The full list with the level and data source for each is above.

How many people does Pryor Water serve?

Pryor Water reports serving 406 people in Montana, per its EPA record.

Has Pryor Water had any water quality violations?

The EPA has 236 violations on file for Pryor Water, of which 18 are health-based (a contaminant limit or required treatment was breached) and 2 remain open. The rest are monitoring or reporting failures.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.