Compliance record
Formal violations the EPA has on file for this supplier. A health-based violation means a contaminant limit or a required treatment was breached; the rest are monitoring or reporting failures — still violations, but not a measured health risk.
| Violation | Type | Status | Period |
|---|---|---|---|
| MCL | Health-based | Resolved | 2013-08-01 → 2013-08-31 |
| MR | Monitoring | Resolved | 2019-10-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-10-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-10-01 → 2019-12-31 |
| MR | Monitoring | Resolved | 2019-10-01 → 2019-12-31 |
| RPT | Monitoring | Resolved | 2019-10-01 |
| RPT | Monitoring | Resolved | 2019-10-01 |
| RPT | Monitoring | Resolved | 2019-10-01 |
| RPT | Monitoring | Resolved | 2019-10-01 |
| MR | Monitoring | Resolved | 2018-10-01 |
Other contaminants detected
| Contaminant | Level vs EPA limit | Detection rate | Source | Period |
|---|---|---|---|---|
| Copper | 254 µg/L 20% of the EPA limit 1300 µg/L
worst single sample: 340 µg/L | 30/30 | SYR4 | 2012–2018 |
| Lead | 2.8 µg/L 19% of the EPA limit 15 µg/L
worst single sample: 6.6 µg/L | 25/30 | SYR4 | 2012–2018 |
| Nitrate | 315 µg/L 3.2% of the EPA limit 10000 µg/L
worst single sample: 320 µg/L | 22/22 | SYR4 | 2012–2019 |
| Lead | 0.00065 mg/L 4.3% of the EPA limit 0.0150 mg/L | 7/7 | LCR | 2025 |
| TTHM | 8.05 µg/L 10% of the EPA limit 80 µg/L
worst single sample: 8.1 µg/L | 6/8 | SYR4 | 2012–2019 |
| Total Haloacetic Acids (HAA5) | 3.5 µg/L 5.8% of the EPA limit 60 µg/L
worst single sample: 3.8 µg/L | 6/8 | SYR4 | 2012–2019 |
| Combined Radium (-226 And -228) | 1.20405 pCi/L 24% of the EPA limit 5 pCi/L
worst single sample: 1.218 pCi/L | 4/4 | SYR4 | 2013–2019 |
| Combined Uranium | 2.79226 µg/L 9.3% of the EPA limit 30 µg/L
worst single sample: 2.8012 µg/L | 4/4 | SYR4 | 2013–2019 |
| Arsenic | 2.09 µg/L 21% of the EPA limit 10 µg/L
worst single sample: 2.1 µg/L | 3/3 | SYR4 | 2012–2018 |
| Barium | 21.8 µg/L 1.1% of the EPA limit 2000 µg/L
worst single sample: 22 µg/L | 3/3 | SYR4 | 2012–2018 |
| Chromium | 1.875 µg/L 1.9% of the EPA limit 100 µg/L
worst single sample: 1.9 µg/L | 2/3 | SYR4 | 2012–2018 |
| Fluoride | 51311.5 µg/L 1283% of the EPA limit, at the 95th percentile of samples — 4000 µg/L
worst single sample: 54000 µg/L | 2/3 | SYR4 | 2012–2018 |
| Cyanide | 5 µg/L 2.5% of the EPA limit 200 µg/L | 1/4 | SYR4 | 2012–2018 |
| Gross Alpha, Excl. Radon And U | 0.8490 pCi/L 5.7% of the EPA limit 15 pCi/L | 1/1 | SYR4 | 2013 |
90 contaminants tested, none detected
Utility contact
Frequently asked questions about Keshena
Is Keshena tap water safe to drink?
EPA monitoring detected 14 contaminants in Keshena's water. A detection isn't the same as a violation — most levels are within federal limits. See each level and source above, and the utility's annual Consumer Confidence Report for its official compliance status.
What contaminants were detected in Keshena's water?
EPA monitoring detected Copper, Lead, Nitrate, Lead, TTHM, and others. The full list with the level and data source for each is above.
How many people does Keshena serve?
Keshena reports serving 3,960 people in Wisconsin, per its EPA record.
Has Keshena had any water quality violations?
The EPA has 37 violations on file for Keshena, of which 1 is health-based (a contaminant limit or required treatment was breached) and 0 remain open. The rest are monitoring or reporting failures.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.