← North Carolina

Tap water quality report

Bryson City, NC

EPA monitoring detected 14 contaminants across the 3 water suppliers serving Bryson City. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

3
water suppliers
4,576
people served
14
contaminants found

What was found in Bryson City's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
Copper
130.6 µg/L 10%
of the EPA limit 1300 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2018
Highest in the city: 4840.75 µg/L — NANTAHALA VILLAGE · 135 people · 2019
3/3 SYR4
Nitrate
100 µg/L 1%
of the EPA limit 10000 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
Highest in the city: 1300 µg/L — NANTAHALA VILLAGE · 135 people · 2019
3/3 SYR4
Fluoride
160 µg/L 4%
of the EPA limit 4000 µg/L
Highest in the city: NANTAHALA VILLAGE · 135 people · 2019
2/3 SYR4
Nitrate-Nitrite
99.15 µg/L 1%
of the EPA limit 10000 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2015
1/3 SYR4
Total Haloacetic Acids (HAA5)
66.7 µg/L 111%
of the EPA limit, at the 95th percentile of samples — 60 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
2/3 SYR4
TTHM
65 µg/L 81%
of the EPA limit 80 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
2/3 SYR4
Chloroform
57.76 µg/L
No EPA limit set
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
2/3 SYR4
Lead
9.5 µg/L 63%
of the EPA limit 15 µg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2018
Highest in the city: 40.3 µg/L — NANTAHALA VILLAGE · 135 people · 2019
3/3 SYR4
Trichloroacetic Acid
38.7 µg/L
No EPA limit set
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
1/3 SYR4
Barium
34 µg/L 1.7%
of the EPA limit 2000 µg/L
Highest in the city: NANTAHALA VILLAGE · 135 people · 2019
1/3 SYR4
Dichloroacetic Acid
30.5 µg/L
No EPA limit set
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
2/3 SYR4
Bromodichloromethane
2.79 µg/L
No EPA limit set
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
1/3 SYR4
Dibromoacetic Acid
1 µg/L
No EPA limit set
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2019
1/3 SYR4
Lead
0.0 mg/L 0%
of the EPA limit 0.0150 mg/L
Main supplier: BRYSON CITY, TOWN OF · 4,395 people · 2025
Highest in the city: 0.0070 mg/L — PELOHI COVE · 46 people · 2025
3/3 LCR
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Bryson City

SupplierPopulation served
BRYSON CITY, TOWN OF 4,395
NANTAHALA VILLAGE 135
PELOHI COVE 46

Frequently asked questions about Bryson City tap water

Is Bryson City tap water safe to drink?

EPA testing detected 14 contaminants in the water serving Bryson City. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Bryson City?

3 public water suppliers report drinking-water monitoring for Bryson City, North Carolina to the EPA. Each is listed above with its population served.

What contaminants are in Bryson City's water?

The contaminants EPA monitoring detected in Bryson City include Copper, Nitrate, Fluoride, Nitrate-Nitrite, Total Haloacetic Acids (HAA5). The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.