What was found in St George's water
The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.
| Contaminant | Level vs EPA limit | Suppliers | Source |
|---|---|---|---|
| Copper | 76.525 µg/L 5.9% of the EPA limit 1300 µg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2019
Highest in the city: 400 µg/L — PORT CLYDE WATER DISTRICT · 330 people · 2018 | 2/2 | SYR4 |
| Fluoride | 300 µg/L 7.5% of the EPA limit 4000 µg/L Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| TTHM | 14.435 µg/L 18% of the EPA limit 80 µg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2019 | 2/2 | SYR4 |
| Bromodichloromethane | 9.42 µg/L No EPA limit set Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Chloroform | 7.695 µg/L No EPA limit set Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Dibromochloromethane | 7.31 µg/L No EPA limit set Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Lead | 2 µg/L 13% of the EPA limit 15 µg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2019
Highest in the city: 4.52 µg/L — PORT CLYDE WATER DISTRICT · 330 people · 2018 | 2/2 | SYR4 |
| Gross Alpha, Excl. Radon And U | 3.06 pCi/L 20% of the EPA limit 15 pCi/L Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2019 | 1/2 | SYR4 |
| Barium | 2.74 µg/L 0.1% of the EPA limit 2000 µg/L Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Chromium | 2.28 µg/L 2.3% of the EPA limit 100 µg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2019 | 2/2 | SYR4 |
| Total Haloacetic Acids (HAA5) | 1.76 µg/L 2.9% of the EPA limit 60 µg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2019 | 1/2 | SYR4 |
| Combined Radium (-226 And -228) | 1.032 pCi/L 21% of the EPA limit 5 pCi/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2015 | 2/2 | SYR4 |
| Antimony, Total | 0.5100 µg/L 8.5% of the EPA limit 6 µg/L Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Mercury | 0.0510 µg/L 2.6% of the EPA limit 2 µg/L Highest in the city: PORT CLYDE WATER DISTRICT · 330 people · 2018 | 1/2 | SYR4 |
| Lead | 0.0 mg/L 0% of the EPA limit 0.0150 mg/L Main supplier: TENANTS HARBOR WATER DISTRICT · 378 people · 2024
Highest in the city: 0.0041 mg/L — PORT CLYDE WATER DISTRICT · 330 people · 2023 | 2/2 | LCR |
Water suppliers serving St George
| Supplier | Population served |
|---|---|
| TENANTS HARBOR WATER DISTRICT | 378 |
| PORT CLYDE WATER DISTRICT | 330 |
Frequently asked questions about St George tap water
Is St George tap water safe to drink?
EPA testing detected 15 contaminants in the water serving St George. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.
How many water suppliers serve St George?
2 public water suppliers report drinking-water monitoring for St George, Maine to the EPA. Each is listed above with its population served.
What contaminants are in St George's water?
The contaminants EPA monitoring detected in St George include Copper, Fluoride, TTHM, Bromodichloromethane, Chloroform. The full list, with the level at the main supplier and the data source, is in the table above.
Where does this data come from?
Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.