← California

Tap water quality report

Santa Fe Springs, CA

EPA monitoring detected 18 contaminants across the 2 water suppliers serving Santa Fe Springs. A detection doesn't automatically mean the water is unsafe — see the level at the main supplier for each below, with its EPA source and period.

2
water suppliers
57,452
people served
18
contaminants found

What was found in Santa Fe Springs's water

The level at the city's main supplier, the highest level anywhere in the city, the EPA limit for each, and where every figure comes from.

ContaminantLevel vs EPA limitSuppliersSource
TTHM
48.85 µg/L 61%
of the EPA limit 80 µg/L
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 63.665 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Lithium
60 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2024
2/2 UCMR-5
Total Haloacetic Acids (HAA5)
23 µg/L 38%
of the EPA limit 60 µg/L
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
2/2 SYR4
Dibromochloromethane
15.85 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 21.905 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Chloroform
17.35 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 19.55 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Bromodichloromethane
14.85 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 19.42 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Bromoform
12.7 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
2/2 SYR4
Dichloroacetic Acid
10 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 11.4 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Trichloroacetic Acid
6.815 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
2/2 SYR4
Dibromoacetic Acid
5.8 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
Highest in the city: 6.12 µg/L — SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2019
2/2 SYR4
Monochloroacetic Acid
3.56 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
2/2 SYR4
Monobromoacetic Acid
1.6 µg/L
No EPA limit set
Main supplier: GSWC - CULVER CITY · 38,233 people · 2019
2/2 SYR4
Pfba
0.0140 µg/L
No EPA limit set
Highest in the city: SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2024
1/2 UCMR-5
PFOS
0.0140 µg/L
No EPA limit set
Highest in the city: SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2024
1/2 UCMR-5
PFOA
0.0069 µg/L
No EPA limit set
Highest in the city: SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2024
1/2 UCMR-5
Lead
0.0056 mg/L 37%
of the EPA limit 0.0150 mg/L
Main supplier: GSWC - CULVER CITY · 38,233 people · 2025
2/2 LCR
PFBS
0.0052 µg/L
No EPA limit set
Highest in the city: SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2024
1/2 UCMR-5
Pfpea
0.0039 µg/L
No EPA limit set
Highest in the city: SANTA FE SPRINGS - CITY, WATER DEPT. · 19,219 people · 2024
1/2 UCMR-5
Each bar shows the measured level as a share of the EPA limit: green is well under, amber is close to it, red is over. For lead and copper the limit applies to exactly the 90th-percentile figure shown, so red there means a real exceedance. For everything else the limit applies to a running annual average while the figure is the 95th percentile of the system's samples — over 100% is worth reading, but is not by itself a violation. Formal violations are listed separately. These are the utilities' own EPA-reported results, not a city-wide average. A detection means the lab measured the substance — it isn't the same as exceeding a legal limit. Hover a source tag to see the EPA program and years behind each figure.

Water suppliers serving Santa Fe Springs

SupplierPopulation served
GSWC - CULVER CITY 38,233
SANTA FE SPRINGS - CITY, WATER DEPT. 19,219

Frequently asked questions about Santa Fe Springs tap water

Is Santa Fe Springs tap water safe to drink?

EPA testing detected 18 contaminants in the water serving Santa Fe Springs. A detection isn't the same as a violation — most detected levels are within federal limits. Check the level and source for each contaminant above, and your utility's annual Consumer Confidence Report for the official compliance status.

How many water suppliers serve Santa Fe Springs?

2 public water suppliers report drinking-water monitoring for Santa Fe Springs, California to the EPA. Each is listed above with its population served.

What contaminants are in Santa Fe Springs's water?

The contaminants EPA monitoring detected in Santa Fe Springs include TTHM, Lithium, Total Haloacetic Acids (HAA5), Dibromochloromethane, Chloroform. The full list, with the level at the main supplier and the data source, is in the table above.

Where does this data come from?

Every figure is official EPA drinking-water monitoring — the Lead & Copper Rule, the UCMR-5 nationwide testing program, and the EPA Six-Year Review — not our own testing. Each number is labelled with its source and period.